All you need to know about CE Marking
Need answers fast? Book a free 30-min consultation
PPWR Timeline: Key Deadlines from 2026 to 2040
Regulation (EU) 2025/40 does not have a single compliance date. It has six, spread out from August 2026 to January 2040, and they carry different consequences. Some come with no grace period at all for packaging already in stock. Others depend on delegated and implementing acts the European Commission has not published yet, which means the deadline is fixed but the exact technical requirement behind it is still moving.
What Do I Need to Have Ready by August 12, 2026?
This is the date the PPWR becomes generally applicable, and it carries the largest single cluster of obligations in the entire regulation. From this date, only packaging that complies with the PPWR can be placed on the EU market, and there is no grace period for packaging already produced or sitting in a warehouse.
The core requirements landing on this date include a PPWR Declaration of Conformity and the underlying technical documentation, a unique identifier assigned to each unit of packaging for traceability, and the first wave of substance restrictions.
Packaging intended for food contact has to meet the PFAS limits set out in Article 5(5): 25 ppb for any individual PFAS substance, 250 ppb for the sum of all PFAS present, and 50 ppm of total fluorine. Heavy metal limits carried over from the old Packaging and Packaging Waste Directive also apply. Reusable packaging systems have to meet their own set of requirements from this date as well.
What Changes for My Packaging Between 2027 and 2029?
The three years after the general application date bring a sequence of identification and labeling requirements, each building on the last.
From February 12, 2027, the identifier tied to EPR obligations has to exist in digital form. A physical marking is no longer sufficient on its own for this specific requirement.
From August 12, 2028, two things land on the same date. Harmonized labeling becomes mandatory, covering material composition and recycling symbols, though the exact format still depends on an implementing act that has not been published. Alongside it, a data carrier, typically a QR code or a GS1 Digital Link, becomes mandatory for certain packaging categories.
This is also the point where the PPWR starts converging with the Digital Product Passport under the ESPR: where a product already carries a DPP, the same data carrier can serve both obligations instead of requiring two separate codes.
From February 12, 2029, labeling requirements extend specifically to reusable packaging, closing the gap between how single-use and reusable formats are identified.
What Should I Prepare Before the 2030 Deadlines?
January 1, 2030 concentrates more obligations than any other date in the regulation. From this point, all packaging needs to meet at least grade C recyclability.
Minimum recycled content targets for plastic packaging take effect. The Annex V restrictions on specific single-use plastic packaging formats apply. The empty space rule under Article 24 caps empty space at 50% for grouped, transport, and e-commerce packaging, though the exact calculation methodology is still pending its own implementing act. Reuse targets also begin, requiring 40% of transport and e-commerce packaging to be reusable.
That last point has a detail worth getting right, particularly for a non-EU manufacturer shipping transport packaging like pallets into the EU. The reuse targets under Article 29 apply only within the territory of the Union, meaning both the importer and the distributor involved need to be EU-based for the target to apply. For transport packaging that enters the EU from a third country, the target applies from the first warehouse where the goods arrive, are stored, and are unpacked for further distribution, through to the final destination. A shipment with a single final destination does not need to be repackaged into reusable packaging along the way.
Real exemptions from the reuse target exist under Article 29(4), but they are narrower than they might sound: dangerous goods covered by Directive 2008/68/EC, and packaging custom-designed for large-scale machinery and equipment. Both require supporting documentation in the technical file to be relied on. Responsibility for meeting the target sits with the “user” of the transport packaging, meaning whichever operator, manufacturer, importer, or distributor, places the product on the EU market in that packaging. The Commission’s guidance on the PPWR sets this out in more detail in the sections covering reuse in international trade.
What Happens to My Packaging After 2030?
The remaining deadlines sit far enough out that they matter more for design decisions today than for immediate action. From January 1, 2035, the recyclability grading shifts to include design-for-recycling criteria combined with a recycled-at-scale assessment.
From January 1, 2038, only grades A and B remain permitted on the market, phasing out grade C entirely. From January 1, 2040, recycled content targets for plastic packaging increase further.
How Many of These Deadlines Depend on Rules That Don’t Exist Yet?
The PPWR foresees roughly 30 delegated and implementing acts to fill in the technical detail behind dates like the empty space calculation methodology, the harmonized labeling format, and the design-for-recycling criteria. As of mid-2026, only one of them has been adopted.
This creates a genuine planning problem. Waiting for each piece of secondary legislation before acting means missing the underlying deadline, which does not move just because the implementing act is late. The safer approach is to plan against the text of the regulation as it stands today and adjust the details once the missing acts are published, rather than treating the absence of guidance as a reason to wait.

Interested in the PPWR?
Which Deadline Should I Prioritize Right Now?
Of everything on this timeline, the PFAS restrictions taking effect on August 12, 2026 deserve particular urgency. Unlike some of the later deadlines, there is no harmonized testing methodology at EU level yet to confirm compliance, which means manufacturers with food-contact packaging need to start verifying their supply chain now rather than closer to the date. Everything else on this timeline matters, but this is the deadline with the least room to wait.
If you want help mapping which of these deadlines actually apply to your packaging portfolio, our team can walk through your product range and build a compliance schedule around it. Request a quote and tell us what you ship to the EU.
Read this far? The next step is a free 30-min consultation
Category: PPWR








